Warmup Inslab Cable System

Warmup Inslab Cable System The Inslab Cable is designed for use within a concrete floor construction. Best suited for The Inslab cable system is designed for installation in concrete slab of 2″ to 4″ (50mm to 100mm). If insulation is absent or beneath more than 4″ (100mm) of concrete subfloor, insulation boards must be used to ensure optimum heat-up times. The Inslab cable system is for installation within concrete floors, and is ideal for new constructions where floor height is not an issue. This heating cable is suitable for almost any flooring finish and in particular where the flooring (wood, carpet, vinyl) may be replaced from time to time. The slower heat-up and cool-down time of the Inslab cable makes it particularly suitable for rooms which are in constant use, as the slab can be used as a form of storage heating, making effective use of cheaper, low-tariff energy usage. Warranty Safety Net Installation Guarantee If you accidentally damage the heating system during installation, return it to Warmup and we will replace it with another heater of the same make and model free. 10-Years Limited Warranty This product comes with a 10-Years Warranty. We are completely confident in the standard of our products. Technical SpecificationsCable Sizing GuideProduct DocumentationCAD Section Operating voltage 120V, 240V and 208V (de-rated) Cable thickness 3/8″ (10mm) Output rating 5.5W/linear foot Coil tail length A16.4″ (610cm) Cable length tolerance +/- 5% Max Operating Temp. 464°F (240°C) Approvals cULus
Image and video hosting by TinyPic